Daniel Ringuette

Hey everyone, I wanted to tell you all a story today what happened on a Macbook mid 2010 13” unibody model. Anyway’s, the cus...

Hey everyone, i have an ipad 4 wifi model here in for repair . The customer told me it wouldn’t boot up and it had a black sc...

Hey I have a iPod touch 6th gen come in for repair anyways, this is the third one that came in wasn’t charging or turning on…...

Question and I need help! I have an HP Stream and the hard drive is only 32gb and soldered via EMMC and need to upgrade it! I...

Hey everyone, I wanted to post here as I also fix iphones, ipads, ipods and provide micro soldering on basic level repairs su...

Here is my answer and this may help. If you tried a new cam, and it still boots to logo then shuts off then does it over and over.. try another screen. Some screens are cheaply made and won’t register with the boot up process and will fail causing the boot loop. Try putting the old screen on and seeing if it’ll boot. If it does, your screen is bad and should be replaced with a higher quality display. I had one come in from a shop same issue and it ended up being a cheap quality replacement screen causing the boot loop.

Blown U2 IC is culprit. need to have a micro solder technician replace the tristar!

use this tool to take out any broken headphones out of the existing headphone jack port : GripStick Headphone Plug Extraction Tool

No it's not, Unsure why you are telling him false information. The hard drive is soldered EMMC flash based hard drive and is not upgradeable... However though, there is a guide using your existing WIFI Lan Port to get a bigger SSD inside this laptop and upgrade available here: HP Stream 13 Disassembly for Upgrading the PCIe mini SSD

Replace the dock connector! And no pocket lint is normal but it shouldn't happen all the time! I'd throw your phone in a lifeproof case

how does the contacts look for the speaker on the charge port? Are they corroded? I would replace the charge port also as water can damage the wiring inside the charging dock connector!

If it dies fast and you tested the battery, you have a faulty U2 IC chip and needs to be replaced and resoldered! A board level technician will be able to replace it for you! Also using third party cables and modified cables can also blow the U2 IC Tristar chip on the board and you get those symptoms!

Run the extended version of the Apple Hardware Test. Sometimes you will get an error if you run the quick version, and it may be something of a false positive. Some have found doing an SMC reset 3 or 4X can eliminate the error (note: a work around not a fix). If it is indeed a logic board error it points to a sensor(s) failing, VPOR might be VGC(VPU) related. You'll probably need a new logic board, AFAIK sensors as well as the VGC are soldered to the logic board which pretty much makes them non-DIY repairs, as soldering on logic boards are not for amateurs.

are the front cams original oem? If they are not, you will have boot loop problem! I would also dfu restore the phone as well

sounds like it was a cheap replacement so when you cracked it, the digitizer is no longer working. You'll have to replace the glass once again

Hey Kevin,

I have a newer HP Stream 14inch and I took it apart and not sure what card to order but it’s a newer wifi module than the one you have posted!

Here is a link to it: https://ibb.co/hANX98

Please tell me what card to buy to upgrade to an SSD