Luis

@cascara

Luis

927	Reputação
35	Soluções
0	Guias
Membro desde 08/06/2013

Votos

I love tinkering and working with all kids of electronics. Self taught in mobile device and computers repair and enjoy everything that has to do with smart home devices . when I am not repairing or tinkering I am either 3D printing or laser engraving . I love coming in here to learn from others and once in a while put in my input to help others.

Guias concluídos

Samsung Galaxy S III Broken Front Glass Replacement

Perguntas

random restarts with random kernel. How to troubleshoot? 10 de jul de 2021
Getting random restarts and random kernel errors like: mdworker, imklaunchangent, AssetCacheLocato, to UNKOWN and among...

Respostas

Resposta para "red and copper wire green wire and a blue wire what are these" há 5 dias14 de mai de 2022
see if this helps: Help with splicing Turtle Beach wire
Resposta para "What is this part named?" 5 de abr de 2022
Not sure on the name of the parts but I found this guy HERE on ebay.
Resposta para "Does anyone know where I can find this part?" 5 de mar de 2022
That part tends to fail quite often , I know its a long shot but if you have a 3D printer or know someone who does you can print it out a strong material like PTEG ,Carbon or PC. I had to design that part when my August lock broke. I couldn’t find the part anywhere. Contacting August did not help either. @Jayeff , he’s suggestion is great , buying a broken AS IS or used lock will probably be the only way to get parts.
Resposta para "Need Remote Control for LRA08PZU1" 6 de jan de 2022
try amazon https://www.amazon.com/Easytry123-FFRH11L2R10-FFRH11L2R11-FFRH18L2R20-LRA08PZU110/dp/B07R1JX6CR
Resposta para "Is there a way to have a firestick remote only control one firestick?" 15 de dez de 2021
Are the 3 tvs same make and model? if so, try disabling HMDI CEC or connect the firesticks to a non HDMI CEC port. I had two TCL tvs that were doing the same thing.
Resposta para "I need to solider wire to mother board on nest outdoor camera" 11 de dez de 2021
when you say ripped off….did completely come off the board? including the connector? The wire for the Nest outdoor cam leads to a JST type 4 pin connector that connects to the board. I couldn’t find a schematic for the board but if you look at the board with the solder pads pointing towards you…from left to right…RED, WHITE,GREEN,BLACK is the order of the wires.
Resposta para "cant print with 3D" 7 de dez de 2021
what 3D printer you have? If it starts 10mm off the build plate then there’s probably something wrong with your starting gcode. check your start gcode or check you limit switch which may prevent the nozzle from going further down if its not set correctly.
Resposta para "Why is there a clicking noise when I shake my airpods?" 20 de ago de 2021
its a known issue on the pro version, make sure you have the latest firmware installed (3E751). If that doesn’t help.. go to settings under Bluetooth and go to your Airpods settings and turn off noise control.
Resposta para "help to repair my watch 3 LTE" 18 de jul de 2021
Its hard to say what the first picture is pointing at but it seems that you’re referring to the Force Touch gasket ? Ifixit sells the spare part. As for the second picture , luckily its just copper tape.
Resposta para "Removed R1204 resistor, Impact?" 14 de jul de 2021
Last time i checked i thought this icloud removal method will only work for the ipad mini 4G not wifi models but i could be mistaken. However, if you damaged R0941 which right next to R1204 then it can give you issues because it’s linked to rear camera and on the other side C0961 and 62 are linked with the front camera , and the one above R0720 looks like its some kind of CODEC for speaker/amp. I know im not giving you a solution here but perhaps with this information and maybe some little research it might lead you on the right path. Good luck.