John Savio

1.505	reputação
86	Soluções
0	Guias
Membro desde 20-10-2012

Votos

I love deadlines. I like the whooshing sound they make as they fly by.

Guias concluídos

Apple Mighty Mouse Scrollball Disassembly

iPhone 5s Lightning Connector Replacement

iPhone 4 Headphone Jack & Volume Control Cable Replacement

iPhone 5s Home Button Replacement

iPhone 5s LCD and Digitizer Replacement

HTC Sensation Touchscreen/Digitzer Replacement

Installing MacBook Pro 13" Unibody Mid 2010 Dual Hard Drive

iPhone 5 LCD Shield Plate Replacement

Substituição do cabo plano do botão home do iPhone 5

iPhone 5 Home Button Replacement

Página 1 de 8

Avançar

Perguntas

iPod will not turn on after replacing the lcd. 27-07-2013
Hi all, I have an ipod touch 4th gen 16gb on which I did a lcd replacement. I have done this a lot of times but never encount...

Respostas

Responder a: MacBook is overheating from idle to regular use 25-05-2017
Hi, I would suggest use an app to control your fans, so that they spin a bit more faster which in turn will keep the temps down. I would suggest try using this app and see how it works. You could also try and re-apply your cpu compound which will help as well to reduce the temps. https://www.crystalidea.com/macs-fan-control Hope this will solve your issue.
Responder a: screen is blank after replacing battery 11-01-2014
Hi, have you tried pressing the home and power button together for about 10 secs and then pressing the power button to power it up again? If that still does not work, check if the cable is seated properly. Still no luck, then u might have damaged the flex cable when u installed the screen. Write back on what u did. Good luck.
Responder a: What does error code BIOHD-2 mean? 11-01-2014
Hi, Do u have a dvd drive also connected. You need to open your computer and look for the cables that connect the hard disk and dvd drive to the motherboard. Try using different sata ports. If still it does not work, try plugging them one at a time. Hope this helps. Write back on what u did. Good luck.
Responder a: sd card reader doesnt work need new reader card slot? 11-01-2014
Just follow this guide. Nintendo 3DS SD Board Replacement
Responder a: Can I upgrad graphics card on my iMac 24inch 2.66ghz? 02-11-2012
Hi, you cannot upgrade the GT9400m as it is soldered to the logic board. Check the link below. Hope this helped. http://forums.macrumors.com/showthread.p...
Responder a: I cant see my files and games insatlled in my PSP 10-06-2013
Hi, if u have a bad or corrupted memory card try coping the files to ur computer and then format the card using the psp. Then try putting the files back and check if u can access them. Write back on what u did. Good luck.
Responder a: My xbox 360 (newer version) won't turn on? 12-05-2013
Hi, it might be that the cables are faulty. Can u see the xbox showing the green rings? An hdmi cable is not that costly now, so see if u can get one and test with hdmi. Write back on what u did. Good luck.
Responder a: Nes Motherboard Oven Reflow 18-03-2013
First thing u need to do is clean the motherboard using isopropyl alcohol. Use a small brush to clean all the parts. Only after that should u consider any other option and one more thing, solder melts at 183 degree centigrade and the non lead solder melts at 217 degree centigrade. Also to the reflow be successful u need to use liquid flux. But clean first. Write back on what u did. good luck.
Responder a: Red light comes on when I plug up my xbox? 17-03-2013
Hi, most probably it is an issue with the power supply unit. Do u have access to another power supply unit, like one from a friend? Plug that in and see if that works ok. If that is ok then u would want to replace the psu. Did this happen after an intense session of gaming? Write back on what u did. Thanks.
Responder a: I can't tell where to plug wireless cable in HP Laptop Presario CQ50 17-03-2013
Hi, u need to route the cables underneath to the wifi card. There is picture of the wifi card in step 5. There should be two arrows on the card near the connector points. One black and the other one white. The black cable goes to the black connector and the white cable to the white connector. Hope this helps. Write back on what u did. Good luck.