Is the cable/connector itself torn or is the connector popped out? If the cable is torn it's probably best to replace the whole camera and sensor assembly. Parts currently cost $27.49 USD directly from iFixit. If the connector popped out you can reconnect it by pressing it in "one end at a time". Trying to press it into the socket all at once may bend the connector. Steps 15 and 17 of the front camera repair guide talk about this issue.

Howdy Trinity - it’s possible, but unlikely, that would work.

Zippo uses a white gas/naphtha type fuel. BIC, and most other encased plastic lighters, use butane type fuel.

Butane has to stay in a tightly sealed container or it will evaporate within a few minutes. Zippo lighters do not have this tight of a seal (even when upgraded with rubber or silicone gaskets).

If you have another Zippo lighter with the correct fluid in it I would recommend transferring the insert. This is easier than attempting to transfer the fluid itself as that is a complicated process resulting in losing a lot of the fluid anyway.

It’s possible to use non-branded forms of white gas/naphtha fluid in a lighter but I can’t recommend using anything other than “lighter fluid”. Other naphtha type fuels have application specific additives and may be extremely toxic.

PLEASE NOTE: some fluids marked as “white gas” are actually additive-free gasoline. This is highly explosive and therefore extremely dangerous to use as a lighter fluid.