| 3.063 | Reputation |
| 5 | Soluções |
| 1 | Guia |
| Membro desde 08-09-2011 | |
We fix all types of devices from laptops to tablets and...
| Evento | Contagem | Delta |
|---|---|---|
| Alguém completou seu guia | 166 | 2177 |
| Alguém curtiu seu guia | 48 | 405 |
| Post votado para cima contendo um link para o seu guia | 37 | 252 |
| Voto à favor da postagem | 11 | 132 |
| O administrador aprovou o seu guia | 1 | 100 |
| Edição patrulhada de um guia aceita | 2 | 2 |
| Votou negativo para o post | 3 | -6 |
I have never tried using a hairdryer. Only use a warm setting; don't use the highest setting or you might start melting it. It is stuck by a low-tack adhesive.
Tesa 4965, Tesa 61395 or Hi-bond VHB tape.
What temp and time did you use? face up or down?
The 64 Bit Driver Kit should have all the bits you need.
Mako Driver Kit - 64 Precision Bits
All A1278, A1286 and A1297 macbooks have replaceable keyboards.
The instructions seem clear to me. I think you might of missed step 32; thats why you damaged the digitizer FPC connector.
Hi
Answers:
Q1. You can remove the upper display assembly from the top case, then you can place the top case flat on your work surface.
2) buy a screw extractor set.
Hope this helps.
Where are you?
As far I can tell the QWERTZ (DE) and QWERTY (UK) keyboards have the same physical layout and and the keyboard connector is in the same place.
Phillips #00 is the correct screwdriver for the lower case. Maybe the one you have is worn or badly made.
Página 1 de 2
Avançar