Ajuda
Evento | Contagem | Delta |
---|---|---|
Alguém completou seu guia | 81 | 1953 |
O administrador aprovou o seu guia | 11 | 1884 |
Postagem recebeu avaliação positiva | 9 | 108 |
Resposta aprovada | 3 | 90 |
Alguém curtiu seu guia | 10 | 71 |
Resposta Aceita | 4 | 40 |
Uma postagem contendo um link para o seu guia recebeu avaliação positiva | 1 | 10 |
Votou negativo para o post | 3 | -6 |
Voto contra à postagem | 2 | -12 |
Sua postagem foi apagada por ter sido marcada como não apropriada | 1 | -100 |
Thanks for the feed back
You can blow a circut causing iPad not to work
It would be a board level repair you can send out for microsoldering iPad rehab can do
Yes it is just like phones only on the iPad Air 2&3 and the Pro Series
Highly recommend not doing the screen repair without frame assembly but you can do it just have high chance of screen falling off, or cracking oled when claping it down
Rear camera hmm did you try repeating the connection did the cameras work before repair?
@bryce Stevenson tries connections also the ribbon cable connecting digitizer and LCD. I would assume the screen is faulty defective if that doesn’t work!
Depending on adhesive you use to put back glass
Samsung A50 i think is a screen 1st if device is off or
Depends on which Samsung your working on but this is the best way if you do just screen you would still have to take apart whole device to ensure you don't short circuit anything you must unplug battery!
Página 1 de 2
Avançar