Owen Baker

Ive had some issues replacing the taptic engine. Like connecting the taptic engine itself to the charging port. please help

I need a screen for an iPhone X and there are 2 types of displays. There is soft OLED and hard OLED. Which is better?

I have a friend that wants me to replace a screen on his XR. Is there anything I need to look out for? I have replaced...

I have an iPhone XS Max and I can’t receive images from people with android phones and I also can’t send them to android...

How do I get this hex nut out. My bit just keeps spinning over it

I have an iPhone XR that’s blacklisted but it has apple care. It has a very badly cracked screen. Would Apple replace my...

How can I take the front camera flex out without taking out the battery? I’m going to do a housing swap on an iPhone X and...

I have an iPhone 6S Plus that has a bad esn and it’s on IOS 9 and it won’t let me activate it. Can I put it into dfu mode...

I have a customer that broke there screen and the home button cable ripped and I don’t have any iPhone 6S home button fin...

I have an iPhone 6 motherboard and when it turns on the top portion of the board gets really hot right by the cpu and the...

First of all the iPhone 8 Plus is a little over a year and a half old and considering that it dies at high percentages and bootloops I would try a new battery first and hope for the best.

Bad LCD. Just replace it and it should work.

Maybe try a different seller because the screens on amazon are low quality and total crap. I use the vividfx screens from fixez.com and they work great. They aren’t even that expensive either.

I’ve had difficulties with the 8 and 8+ Taptic Engine’s making bad noises. What happens is the actual post the screw mounts into breaks of from drops and impacts. The trip the worked for me was glueing down the screw hole and then tightening the screw. Hopefully this helps.

It at be a sign of tristar or audio ic going bad. @refectio would know more on this.

I mean you can buy a new cable from Apple for around $20. Or go to a gas station and just buy one for a few dollars. You could try bending the cable you have now back to its place but the fact the it doesn’t work means you should probably just throw it away.

Probably a faulty screen or you mis-aligned the earpiece causing this issue.

Sounds like a broken LCD to me. Replace the screen and see how that goes.

It could possibly be the battery but, it would most likely be a bad charging IC. You need a professional repair specialist that does micro soldering to replace the IC.

It’s probably just a safety feature on the battery to stop over charging. Not much you can do besides replacing the battery.