Repair Pug

@repair_pug

Repair Pug

1.305	reputação
38	Soluções
0	Guias
Membro desde 09-10-2016

I like Moderating things, and keep the user experience clean, effective and a nice environment for all.

I’m also an audiophile with a mind that wanders afar,

Whether it’s tinkering, experimenting, fixing or upgrading, I try to invent my own stuff the way I think it should be when I can and one day, it just may change the world.

I love metal work, Woodwork, and when I don’t have work, I listen to music and repair stuff!

I have 3 pugs, adopted from animal rescue,

They help me out a lot. I also have 3 Bearded Dragons I have from a PetShop that wasn’t taking care, feeding proper diet, I rescued a bearded dragon with severe (MBD) Metabolic Bone Disease and loved it with care and nourished back to life without tremors.

*Music Lover

*Animal Lover

*Technical repair

*RC Airplanes and Drones

===============

Votos

Computing, Technology, Automotives, Mechanical, Biology, Building, Tinkering and fixing are my things ill provide you with my best knowledge and after all... I love Fixing things!

Meus guias favoritos

PlayStation VR Teardown

Mac mini Model A1283 Fan Replacement

Guias concluídos

Repairing iPhone Liquid Damage

Respostas

Responder a: My I pad is disabled 10-08-2018
Turn device off, Hold down the Home Button and plug into ITunes Do not release the home button until it shows an “ITunes Logo showing a Cable” It will then say “Connect to ITunes” Keep in mind, All Data Will Be Erased.
Responder a: I forgot my restriction code and don't have an Apple computer. Help 05-08-2018
You will need to restore the device to remove any restriction passwords. You can do this right on the device, simply go to: >Settings>General>Reset>Reset all settings (This will not remove content or media from the device, only settings.) if that does not remove the restrictions then: >Settings>General>Reset>Erase all content and settings (This option removes all media, and restores the device)
Responder a: Dropped mouse now red laser light not working 02-08-2018
Sounds like the Optical light came off the PCB (Printed Chip on Board) from my research this is an ongoing issue with the mouse after being dropped. -My best bet would be that the light came off the solder joints with - or + connections and causing it not to light and unable to reflect a light to the sensor. You could try taking the mouse apart by locating all the screws, some may be under the mouse glider pads on bottom of mouse, and pop it open with a spudger prying tool. Make sure both the LED connectors are seated correctly into the solder joints on - and + on the PCB.
Responder a: PS4 will not power on 31-07-2018
Press and hold the Power button, Hold it down and you should hear 1 beep, keep holding the power button and you should hear a second beep, Plug in the PS4 controller into the PS4 with USB cable, Press the PS button and go to “Initialize PS4”
Responder a: Cost of repair of simcard reader 27-07-2018
Good question. My estimated number is 2.00$-15.00$ if you have: (1) Soldering iron (2) Solder (3) Most important if you can find that part I looked myself I cannot find it besides eBay, I wouldn’t recommend that and I don’t think IFIXIT sells it either. It’s the reader and not tray, Correct?
Responder a: Xiaomi/EUNI ES808 Foldable scooter/step speed limit? 27-07-2018
You could with some Electronic mind put in a faster brush/brushless motor and put in upgraded batteries to perform better, but that would be called “Modding”. You’ll need: -Electronic experience -Soldiering experience -A bit of safety -New Motor depending on Max Current that the motor can take. -New battery pack for more distance riding. Yes it is possible :D Love this question!
Responder a: Laptop hibernates when lid closed and game playing? 26-10-2016
hello, If you don't want hibernation and free up some disk space you can disable it in Command Prompt, Go to command prompt by searching it or (right clicking) the Start windows logo and click Command Prompt, Once you do and the DOS command box opens type: powercfg.exe -h -off then press enter hibernation will be disabled and youll notice a few extra gigs of space for games :)
Responder a: Screen & lid cover separated 16-10-2016
Hey, Try this website for strong high temp resistant clear adhesives and glues. This could be useful: http://www.masterbond.com/tds/uv25 here is their main website, Lots to pick from http://www.masterbond.com/properties/hig...-temperature-resistant-bonding-sealing-and-coating-compounds
Responder a: Bios doesnt keep time need a repair asap 16-10-2016
that could be the Bios Battery located inside of the PC, It doesn't specify what type of battery it takes, I advise you to look into your Manual for this pc. It will list what brand and model replacement # you need. especially since pcs sometimes liked to puke at you if you put a wrong bios battery in. Look up your alien ware pc M11 in YouTube there are many disassembly guides . Best regards, Darrell Wolfe
Responder a: Get rid of touch and hold gesture 15-10-2016
I believe this Notebook pc has Synaptics Pointing Device, 1. Type in search "Synaptics Pointing Device" and click on that entry (1) If that doesn't show go to "Control panel" and click on "Mouse Properties" 2. A Window will pop up for the Drive, In the Menu Tabs you should see "Device Options" with a -Red Logo- (1) select that option and settings for that specific driver will show, Click on "Settings" under the pointer device selection, Now you can Modify how and which gestures perform and to Disable them or not. Screenshot posted: