O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Here's what we theoretically know about these pylons:
-
Uses Khaydarin crystals to channel energy
-
Takes 100 minerals and 30 seconds to warp in
-
Floats in the air and glows
-
Provides supplies for 8 units
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Scientific analysis of our "prototype" specimen yields the following data:
-
2 unregulated USB ports capable of sourcing 2A total (or whatever max current it's supplied with)
-
The crystal can be activated to glow blue with a switch
-
Prototype: must be powered by a wired 5V 2.1A DC power supply
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
Ferramenta utilizada nesse passo:Manta Driver Kit - 112 Bit Driver Kit$69.95-
Luckily, we just got a shipment of high quality tools! And, they're so nice looking!
-
It's slightly unsettling that even the Protoss are using Phillips screws. It must be a universal standard.
-
The only thing worse than esoteric screw types? Low quality ones. These screws are made of soft metal and are easily stripped. This must be a side-effect of their warp-in technology.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Phew! It looks like the sensitive monitoring equipment survived the explosion. After we scrape up the charred remains of the interns, we shall proceed as planned.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
And here we see the casualties of the warp-in technology:
-
Energy transfer conduits that are dangerously pinched
-
Low reliability conduit-to-socket connections
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
We finally get a glimpse of the Protoss' power channeling circuitry.
-
It is surprisingly sparse and low tech, consisting mostly of surface mount resistors and common electronic components...
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
We've been bamboozled by the Protoss! This isn't a real pylon; it's just a toy! A decoy!
-
Contact our field agents and fire them! Literally, with a Firebat executioner squad.
-
Speaking of being fired, someone’s going to have to take the fall for this. Wait right here! I’m going to go check on…something in the hanger bay…
-
6 comentários
Fairly disappointed with this thing and the quality of the electronics but alas, it’s a toy made in china. Took me about 4 years to get around to it but I finally fixed the faulty power connector thanks to you guys. Thank you so much for this. I could not figure out where those clips were behind the larger sides.