Pular para o conteúdo principal

Introdução

PlayStation 3 super slim - how to fully disassemble.

You can see also: PlayStation 3 Super Slim Teardown


Please SUBSCRIBE to my channel ツ

Vídeo de Apresentação

  1. Remove the three rubber feet, warranty sticker and four screws. Gently pull up on the bottom cover to remove it. Gently pull up on the bottom cover to remove it.
    • Remove the three rubber feet, warranty sticker and four screws.

    • Gently pull up on the bottom cover to remove it.

  2. Slide the HDD cover toward the rear of the device to remove it. Remove the blue screw shown to remove the HDD caddy. Remove the blue screw shown to remove the HDD caddy.
    • Slide the HDD cover toward the rear of the device to remove it.

    • Remove the blue screw shown to remove the HDD caddy.

  3. Use a metal spudger to push the tab on the rear top finisher, and lift up to remove it. Use a metal spudger to push the tab on the rear top finisher, and lift up to remove it. Use a metal spudger to push the tab on the rear top finisher, and lift up to remove it.
    • Use a metal spudger to push the tab on the rear top finisher, and lift up to remove it.

  4. Repeat step 3 for the front top finisher. Repeat step 3 for the front top finisher. Repeat step 3 for the front top finisher.
    • Repeat step 3 for the front top finisher.

  5. Kits de reparo de android

    A new screen or battery is one kit away.

    Comprar agora

    Kits de reparo de android

    A new screen or battery is one kit away.

    Comprar agora
  6. Remove the two screws indicated in the disk reader. Remove the five screws shown around the edge of the top cover. Lift the top cover up to remove it.
    • Remove the two screws indicated in the disk reader.

    • Remove the five screws shown around the edge of the top cover.

    • Lift the top cover up to remove it.

  7. Move the optical disk reader assembly to the left to expose one of the screws holding the power supply in. Remove the two screws indicated and carefully disconnect the cable on the right side of the power supply. Lift the power supply up to remove it.
    • Move the optical disk reader assembly to the left to expose one of the screws holding the power supply in.

    • Remove the two screws indicated and carefully disconnect the cable on the right side of the power supply.

    • Lift the power supply up to remove it.

  8. Carefully disconnect the ribbon cables indicated. Lift the optical disk reader up to remove it. Disconnect and remove the white cable and ribbon cable indicated.
    • Carefully disconnect the ribbon cables indicated.

    • Lift the optical disk reader up to remove it.

    • Disconnect and remove the white cable and ribbon cable indicated.

  9. Remove the seven screws indicated. Lift the motherboard assembly up out of the lower half of the case to remove it. Carefully disconnect the Wi-Fi antenna cables and fan connector indicated by  red arrows.
    • Remove the seven screws indicated.

    • Lift the motherboard assembly up out of the lower half of the case to remove it.

    • Carefully disconnect the Wi-Fi antenna cables and fan connector indicated by red arrows.

  10. Remove the six screws indicated to separate the heatsink and shield from the motherboard. Remove the six screws indicated to separate the heatsink and shield from the motherboard. Remove the six screws indicated to separate the heatsink and shield from the motherboard.
    • Remove the six screws indicated to separate the heatsink and shield from the motherboard.

  11. Did you do it successfully?
Conclusão

To reassemble your device, follow these instructions in reverse order.

22 outras pessoas concluíram este guia.

ZFix

Membro desde: 09-12-2013

166.837 reputação

305 Guias de autoria

Equipe

Master Techs Membro de Master Techs

Community

290 Membros

822 Guias de autoria

What's the name of the screwdriver that undo's the star shaped screws?

themasterassassin8787 - Responder

It is a T8 Torx screwdriver! I'll add the tools to this guide =)

Sam Goldheart -

i took apart my ps3 super slim and put it back together but there is no power what so ever no red light at all

pastorjon.m - Responder

Same here did you fix it?

Kriss -

One thing to pay attention to: The T8 Torx screws (at least on my 500GB model) are Tamper Proof TR8 screws, meaning you need a special screwdriver to undo them. A normal T8 wont work.

Wesley V - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 16

Últimos 7 dias: 121

Últimos 30 dias: 516

Todo: 36,468