Conserte seus objetos Comunidade Loja

Remplacement de la batterie et de la nappe des boutons de marche et de volume de l'iPhone 7

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Voltar para o guia
Inglês
Francês
Passo 8
iPhone 7 Power and Volume Control Cable Battery Replacement: passo 0, imagem 1 %32 iPhone 7 Power and Volume Control Cable Battery Replacement: passo 0, imagem 2 %32

  • If you successfully removed both adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.

  • Prepare an iOpener and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.

  • After about a minute, remove the iOpener, flip the phone over and use a plastic card to break up any remaining adhesive behind the battery.

  • Avoid bending the battery. Damage to the battery may release dangerous chemicals, and could start a fire.

  • Do not pry under the top third of the battery, you may damage the volume button ribbon cable.

Si vous avez réussi à retirer les deux bandes adhésives, passez à l'étape suivante. Sinon, vous devrez retirer la batterie de la coque arrière.

Préparez un iOpener et appliquez-le derrière la coque arrière, directement sur la batterie. Alternativement, vous pouvez appliquer de la chaleur à l'aide d'un pistolet à air chaud ou d'un sèche-cheveux.

Après environ une minute, retirez l'iOpener, retournez le téléphone et utilisez une carte en plastique pour faire céder tout adhésif restant derrière la batterie.

Évitez de plier la batterie. Une batterie endommager peut laisser s'échapper des produits chimiques dangereux et déclencher un incendie.

Ne pénétrez pas sous le tiers supérieur de la batterie, vous risqueriez d'endommager la nappe du bouton de volume.

[* icon_note] If you successfully removed both adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.
[* black] [guide|25705|Prepare an iOpener|new_window=true] and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.
-[* black] After about a minute, remove the iOpener, flip the phone over and use a plastic card to break up any remaining adhesive behind the battery.
+[* black] After about a minute, remove the iOpener, flip the phone over and use a [product|IF145-101|plastic card] to break up any remaining adhesive behind the battery.
[* icon_caution] Avoid bending the battery. Damage to the battery may release dangerous chemicals, and could start a fire.
[* icon_caution] Do not pry under the top third of the battery, you may damage the volume button ribbon cable.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.