Conserte seus objetos Comunidade Loja

Installazione del case superiore nel MacBook Pro Core 2 Duo da 15" modelli A1226 e A1260

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 43 guias que incluem este passo.

Voltar para o guia
Inglês
Italiano
Passo anterior

Traduzindo o passo 7

Passo 7
MacBook Pro 15" Core 2 Duo Models A1226 and A1260 Upper Case Replacement: passo 0, imagem 1 %32 MacBook Pro 15" Core 2 Duo Models A1226 and A1260 Upper Case Replacement: passo 0, imagem 2 %32

  • Disconnect the trackpad and keyboard ribbon cable from the logic board, removing tape as necessary.

  • Note: It is possible to replace the hard drive without disconnecting the keyboard from the chassis, but it will need to be held upright to keep it out of the way, while still allowing you both hands to work on the drive removal.

  • Be careful when removing the keyboard-trackpad ribbon cable to ensure that the rear of the upper case is disengaged from the area near the hinge. It is easy to accidentally bend the screw receivers on either side of the keyboard.

  • Remove the upper case.

Scollegare il cavo piatto della tastiera e del trackpad dalla scheda logica, rimuovendo il nastro secondo necessità.

Nota: è possibile sostituire il disco rigido senza scollegare la tastiera dal case, tuttavia occorre tenerla in posizione sollevata affinché non sia d'intralcio e consenta di rimuovere il disco rigido con entrambe le mani.

Fare attenzione durante la rimozione del cavo piatto della tastiera e del trackpad e verificare che la parte posteriore del case superiore sia sganciata dalla zona in prossimità del cardine. I ricettacoli delle viti su entrambi i lati della tastiera sono facilmente soggetti a piegature accidentali.

Rimuovere il case superiore.

[* black] Disconnect the trackpad and keyboard ribbon cable from the logic board, removing tape as necessary.
-[* icon_note] Note: It is possible to replace the hard drive without disconnecting the keyboard from the chassis, but it will need to be held upright to keep it out of the way, while still allowing you both hands to work on the drive removal. Be careful when removing the keyboard-trackpad ribbon cable to ensure that the rear of the upper case is disengaged from the area near the hinge. It is easy to accidentally bend the screw receivers on either side of the keyboard.
- [* black] Remove the upper case.
+[* icon_note] Note: It is possible to replace the hard drive without disconnecting the keyboard from the chassis, but it will need to be held upright to keep it out of the way, while still allowing you both hands to work on the drive removal.
+[* icon_note] Be careful when removing the keyboard-trackpad ribbon cable to ensure that the rear of the upper case is disengaged from the area near the hinge. It is easy to accidentally bend the screw receivers on either side of the keyboard.
+[* black] Remove the upper case.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.