Pular para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 21 guias que incluem este passo.

Inglês
Japonês

Traduzindo o passo 15

Passo 15
Carefully lift the logic board assembly from its left side and work it out of the upper case, minding the optical drive cable and the I/O ports that may get caught during removal. If necessary, use the flat end of a spudger to separate the microphone from the upper case. Pull the I/O port side of the logic board away from the side of the upper case and remove the logic board assembly.
  • Carefully lift the logic board assembly from its left side and work it out of the upper case, minding the optical drive cable and the I/O ports that may get caught during removal.

  • If necessary, use the flat end of a spudger to separate the microphone from the upper case.

  • Pull the I/O port side of the logic board away from the side of the upper case and remove the logic board assembly.

作業中光学ドライブケーブルとI/O端子に掛からないよう注意しながら、上部ケースから基板アセンブリを左側からゆっくりと取り出します。

必要に応じて、スパッジャーの平面側先端を使って上部ケースからマイクを取り出します。

上部ケースの横から基板のI/O端子側を引き抜き、基板アセンブリを取り出します。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.