Ir para o conteúdo principal

iPod Classic Festplattenkabel austauschen

Inglês
Alemão

Traduzindo o passo 2

Passo 2
iPod Classic Hard Drive Cable Replacement: passo 0, imagem 1 %32
  • Slide the orange hard drive ribbon cable directly out of its connector. The cable may be attached to the logic board with some adhesive. If the cable doesn't immediately come free, carefully pull up on the cable to loosen the adhesive.

Schiebe das orangene Flachbandkabel der Festplatte aus dem Anschluss heraus. Das Kabel kann ein wenig mit dem Logic Board verklebt sein. Wenn das Kabel nicht gleich frei kommt, dann ziehe vorsichtig am Kabel nach oben, um es aus der Klebeverbindung herauszulösen.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.