Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 8 guias que incluem este passo.

Inglês
Chinês
Passo 23
On a clean, hard surface, lay the rear panel on its side. Carefully but firmly push down on it, rolling the entire lip side back into its proper spot.
  • On a clean, hard surface, lay the rear panel on its side. Carefully but firmly push down on it, rolling the entire lip side back into its proper spot.

  • It may be necessary to do this multiple times in order to achieve optimal straightness on the sides. It is better to have the edges of the case pushed in slightly too far rather than not far enough, because the reseating of the front panel will bend the rear panel into its correct alignment.

  • Now that the rear panel is back to a beautiful condition, you can move on to repairing the iPod!

在干净,坚硬的表面上,将后面板放在其侧面。 小心翼翼地紧紧地按下它,将整个机壳的侧面复原到适当的位置。

为了实现最佳的平直度,可能需要多次进行。 最好是将外壳的边缘推到略远的距离,而不是特别的近,因为前面板的复原会将后面板弯曲成正确的对齐方式。

现在后面板回到美丽的状态,可以继续修理iPod!

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.