Ir para o conteúdo principal

iPod Classicのハードドライブの交換

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 8 guias que incluem este passo.

Inglês
Japonês
Passo 23
iPod Classic Hard Drive Replacement: passo 0, imagem 1 %32
  • On a clean, hard surface, lay the rear panel on its side. Carefully but firmly push down on it, rolling the entire lip side back into its proper spot.

  • It may be necessary to do this multiple times in order to achieve optimal straightness on the sides. It is better to have the edges of the case pushed in slightly too far rather than not far enough, because the reseating of the front panel will bend the rear panel into its correct alignment.

  • Now that the rear panel is back to a beautiful condition, you can move on to repairing the iPod!

クリーンで硬いデスク上で、リアパネルを横にします。慎重に、しっかりと押し込みながら、外縁全体を元の位置に整形します。

側面を直線に保つためには、この作業を複数回行う必要があるかもしれません。フロントパネルを再装着すると、リアパネルが正しい位置に戻されるので、ケースの端が少し内側に押し込まれすぎている方が良いでしょう。

リアパネルが元の状態に戻ったので、次はiPodの修理に移りましょう

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.