Conserte seus objetos Comunidade Loja

Remplacement du disque dur d'un iPod classic

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 8 guias que incluem este passo.

Voltar para o guia
Inglês
Francês
Passo 5
iPod Classic Hard Drive Replacement: passo 0, imagem 1 %32

  • Push with your fingers on the rear panel behind the putty knife to minimize bending. Slowly flex the putty knife, as shown in the picture, to ensure that most of the metal tabs on this side of the iPod are disengaged.

  • The theory behind this method is, rather than attempting to not bend the rear panel at all, to bend it in a favorable manner that allows you to easily restore it later. Therefore, any bend in the sides of the rear panel should be drawing the lip of the rear panel away from the iPod, rather than pushing out on the curved surface. This method also disengages as many of the side clips as possible.

Poussez avec vos doigts sur la coque arrière derrière le couteau à mastic pour minimiser la déformation. Pliez doucement le couteau à mastic, comme indiqué sur l'image, pour assurer que la plupart des attaches métalliques de ce côté de l'iPod sont désengagées.

L'idée derrière cette méthode est, plutôt que de tenter de ne pas plier la coque arrière du tout, de la plier de manière à pouvoir la réparer plus tard. Toute déformation des côtés devrait éloigner le rebord de la coque arrière de l'iPod et non la rapprocher de la partie incurvée. De plus, cette méthode ouvre autant de clips latéraux que possible.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.