Chef's Choice M115 Sharpening Stones Replacement

Inglês

Japonês

Traduzindo o passo 3

Passo 3

On the rotating apparatus, holding the sharpening stones in place, are two C-clamps that grip the axle.
Remove the C-clamps by applying pressure to both sides of the "C" and pushing the clamp over and off of the axle.
Pull the bearing off the shaft. It is in between the two C-clamps.
These clamps are very small; use caution to avoid dropping them on the ground or losing them.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.