How to refurbish and clean longboard bushings

Inglês

Coreano

Traduzindo o passo 2

Passo 2

Take apart the trucks by removing the parts in this order: washer #1, bushing #1, metal hangar, bushing #2, washer #2
To remove the hanger, wiggle it off of the kingpin (large bolt), then lift it out of the pivot cup.
Make sure you remember the order of the parts! Take a picture if you need to, or simply refer to the other side of the board for the correct truck setup.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.