Conserte seus objetos Comunidade Loja

Remplacement du boitier arrière du Panasonic Lumix DMC-F7

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 3 guias que incluem este passo.

Voltar para o guia
Inglês
Francês
Passo anterior

Traduzindo o passo 6

Passo 6
Panasonic Lumix DMC-F7 Back Case Replacement: passo 0, imagem 1 %32

  • Place the camera on a flat surface with the front side facing down.

  • Use the spudger to flip up the retaining flap and slide the ribbon cable out of the connector.

  • Hold down on the camera's metal casing with one hand. Using your other hand, remove the back case from the rest of the camera.

Posez la caméra sur sa face avant. Ensuite, utilisez le Spudger pour ouvrir le mécanisme de verrouillage de la bande de film et retirer la bande.

Maintenez le boîtier métallique de l'appareil photo d'une main. En utilisant votre autre main, soulevez complètement le boîtier arrière du reste de l'appareil photo, en vous assurant que la bande de film se sépare.

-[* orange] Lay the camera on its front side. Then, use the Spudger to open the film strip locking mechanism and remove strip.
-[* black] Hold down on the camera's metal casing with one hand. Using your other hand, completely lift the back case off the rest of the camera, making sure the film strip separates.
+[* red] Place the camera on a flat surface with the front side facing down.
+[* black] Use the spudger to flip up the retaining flap and slide the ribbon cable out of the connector.
+[* black] Hold down on the camera's metal casing with one hand. Using your other hand, remove the back case from the rest of the camera.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.