Conserte seus objetos Comunidade Loja

Remplacement de l'écran de la tablette Android Nobis NB09

Voltar para o guia
Inglês
Francês
Passo 2
Android tablet Nobis NB09 Screen Replacement: passo 0, imagem 1 %32 Android tablet Nobis NB09 Screen Replacement: passo 0, imagem 2 %32 Android tablet Nobis NB09 Screen Replacement: passo 0, imagem 3 %32

  • It is recommended that a grounding bracelet be used in order to avoid damage to the device's circuits through ESD (Electro-Static Discharge)

  • Remove the electrical tape covering the motherboard.

  • Remove the four 4.0 mm T4 Torx screws holding the motherboard to the front half of the tablet.

  • Remove any remaining adhesive tape on the exposed area.

  • Disconnect the ribbon cable attachments by lightly pushing up the locking arm (black tab) on each then gently detaching the pin connectors.

Il est recommandé d'utiliser un bracelet de mise à la terre afin d'éviter d'endommager les circuits de l'appareil par ESD (Electro-Static Discharge).

Retirez le ruban isolant recouvrant la carte mère.

Retirez les quatre vis Torx T4 de 4,0 mm qui maintiennent la carte mère à la moitié avant de la tablette.

Retirez tout ruban adhésif restant sur la zone exposée.

[* icon_caution] It is recommended that a grounding bracelet be used in order to avoid damage to the device's circuits through ESD (Electro-Static Discharge)
-[* black] Remove the electrical tape covering the motherboard.
-[* black] Remove the four 4.0 mm T4 Torx screws holding the motherboard to the front half of the tablet.
+[* red] Remove the electrical tape covering the motherboard.
+[* orange] Remove the four 4.0 mm T4 Torx screws holding the motherboard to the front half of the tablet.
[* black] Remove any remaining adhesive tape on the exposed area.
+[* yellow] Disconnect the ribbon cable attachments by lightly pushing up the locking arm (black tab) on each then gently detaching the pin connectors.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.