MacBook Pro 17" Models A1151 A1212 A1229 and A1261 Hard Drive Replacement

Inglês

Italiano

Traduzindo o passo 1

Passo 1

Remove the two silver T6 Torx screws and white (or black) rubber bumpers from the right side of the hard drive.
You'll need to transfer these screws and bumpers to your new hard drive if you're changing drives. Make sure to put these on the right side of the drive when looking at the label with the SATA connector at the far end.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.