Ir para o conteúdo principal

认识和断开线缆连接头

Inglês
Chinês
Passo 12
Recognizing & Disconnecting Cable Connectors, Power Cable Connectors: passo 0, imagem 1 %32 Recognizing & Disconnecting Cable Connectors, Power Cable Connectors: passo 0, imagem 2 %32 Recognizing & Disconnecting Cable Connectors, Power Cable Connectors: passo 0, imagem 3 %32
Power Cable Connectors
  • Power or power supply cable connectors usually have multiple cables running to a large plug with a locking tab. They're often found in larger electronic devices, like gaming consoles and desktop PCs.

  • Squeeze the tab against the connector and pull straight up to disconnect it.

  • To reconnect, push the connector over the socket until the clip engages. You'll hear and feel a distinct "click."

电源线连接器就像这一个有一个小的卡舌将其锁定到位。

要将连接器与插座分开,请按住卡舌,然后从连接器径直从插座上向上拔。

JST连接器和它样式相近但是没有锁定卡舌。还有一些其他样式也差不多,可能有或没有卡舌,可能有二到三个卡舌,还可能有半打甚至更多的线缆。通常这些可以在相机中的麦克风或扬声器、收音机中的电路板上找到。

有些变种样式的插头非常小。如果您尝试通过拉扯线缆的方式来断开其连接,有可能会造成损坏。如果必要的话,最好使用一对镊子晃动插头来使其松弛。

[title] Power Cable Connectors
-[* black] Power cable connectors like this one have a small tab on the side that locks them in place.
-[* black] To separate the connector from its socket, squeeze the tab against the connector, and pull the connector straight up from the socket.
-[* black] JST connectors are similar but don't have the locking tab. There are a few other similar types, with or without the tab, and having 2 or 3, sometimes up to half a dozen or more wires. These may be found connecting a microphone or speaker in a camera, or interconnecting the circuit boards in a radio.
-[* icon_caution] Some variants are very small. If you try to disconnect them by pulling on the wires they may break. Ideally, pull on the body of the plug with a pair of tweezers, rocking it from side to side to ease it if necessary.
+[* icon_note] Power or power supply cable connectors usually have multiple cables running to a large plug with a locking tab. They're often found in larger electronic devices, like gaming consoles and desktop PCs.
+[* black] Squeeze the tab against the connector and pull straight up to disconnect it.
+[* icon_reminder] To reconnect, push the connector over the socket until the clip engages. You'll hear and feel a distinct "click."

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.