iPad Air Wi-Fi Vervanging van het voorste paneel

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 76 guias que incluem este passo.

Inglês

Holandês

Traduzindo o passo 6

Passo 6

Wait one minute to give the adhesive a chance to release and present an opening gap.
If your screen isn't getting hot enough, you can use a hair dryer to heat along the left edge of the iPad.
For complete instructions on how to use a hair dryer, check out this guide.
Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap.
If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle clockwise half a turn.
Don't crank more than a half a turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.
Skip the next two steps.

+	[* black] Wait one minute to give the adhesive a chance to release and present an opening gap.
+	[* black] If your screen isn't getting hot enough, you can use a hair dryer to heat along the left edge of the iPad.
+	[* icon_note] For complete instructions on how to use a hair dryer, [guide\|157348\|check out this guide\|new_window=true].
+	[* black] Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap.
+	[* icon_note] If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle clockwise half a turn.
+	[* icon_caution] Don't crank more than a half a turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.
+	[* black] *Skip the next two steps.*

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.