Ir para o conteúdo principal

The Internal Components of an Atari Lynx

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 5 guias que incluem este passo.

Inglês
Japonês
Passo 2
The Internal Components of an Atari Lynx: passo 0, imagem 1 %32
  • Remove the four 35 mm Phillips #1 screws at each corner of the backside on the Atari Lynx.

  • Pinch the rear panel with your fingers and lift away from the Atari.

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.