Conserte seus objetos Comunidade Loja

Changement étrier de frein avant Mercedes W123

Voltar para o guia
Inglês
Francês
Passo 3
Mercedes W123 Brake Caliper, Front Replacement, Remove the rubber hoses: passo 0, imagem 1 %32 Mercedes W123 Brake Caliper, Front Replacement, Remove the rubber hoses: passo 0, imagem 2 %32
Remove the rubber hoses

  • Next you will need to remove the soft rubber brake hoses.

  • You will have to start by disconnecting the rubber hose from the hard line connection up inside the fender well. Then you can loosen it from the caliper and remove the line. This takes a 14mm wrench for the soft hose and an 11 mm wrench for the brake line.

  • For more information and tips on removing these lines, see the brake hose replacement guide.

  • Speaking of the rubber hoses, this is a great time to replace them with new parts if they show signs of age since they are already off of the car.

Retirer les flexibles de frein

Ensuite, il faut enlever les flexibles de frein en caoutchouc.

Vous commencerez par déconnecter le flexible du câble rigide en haut à l'intérieur de l'aile. Puis, vous pouvez le dévisser de l'étrier. Clé de 14 mm pour le câble mou et de 11 mm pour le câble rigide

Pour plus d'infos concernant la dépose de ces flexibles, consultez le tuto correspondant.

À propos des flexibles de frein, il est grand temps de les remplacer s'ils montrent des signes de vieillissement.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.