Cricut Maker 3 Belt Replacement

Inglês

Italiano

Traduzindo o passo 14

Passo 14

Remove the top metal track

Use a Phillips screwdriver to remove the two 10.2 mm‑long screws securing the left end of the top metal track.
Be careful not to lose the washer and locking washer under each screw.
During reassembly, make sure each screw has a washer and locking washer, with the locking washer between the washer and the head of the screw.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.