Ir para o conteúdo principal

Riparazione FLASH integrato per Nikon D70

Inglês
Italiano

Traduzindo o passo 1

Passo 1
Nikon D70 Flash Repair: passo 0, imagem 1 %32 Nikon D70 Flash Repair: passo 0, imagem 2 %32
  • Ensure that the Built-in flash is OPEN before proceeding.

  • If present, remove the lens. To remove the lens, press and hold the lens-re-lease button while turning the lens clockwise. Be sure the camera is off when removing or exchanging lenses. Keep the lens mount covered with the supplied body cap to ensure that no dust, dirt, or other foreign matter enters its inside.

  • Remove the battery. To remove it, while keeping the camera off, slide the battery-chamber cover latch to the open position and remove the battery.

Assicurati che il flash integrato sia APERTO prima di procedere.

Se presente, rimuovi la lente. Per rimuovere la lente, tieni premuto il pulsante di rilascio mentre si gira l'obiettivo in senso orario. Assicurati che la fotocamera sia spenta durante la rimozione o lo scambio delle lenti. Tieni il supporto della lente coperto con il tappo fornito per evitare che entrino polvere, sporco o altri corpi estranei .

Rimuovi la batteria. Per farlo, con la fotocamera spenta, scorri il fermo del vano batteria in posizione aperta e rimuovila.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.