Opening Procedure (3rd Gen)

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 6 guias que incluem este passo.

Voltar para o guia

Inglês

Coreano

Passo anterior Próximo passo

Traduzindo o passo 22

Passo 22

Opening Procedure (3rd Gen), Separate the screen from the frame: passo 0, imagem 1 %32

Opening Procedure (3rd Gen), Separate the screen from the frame: passo 0, imagem 2 %32

Opening Procedure (3rd Gen), Separate the screen from the frame: passo 0, imagem 3 %32

Separate the screen from the frame

At this point, you've separated most of the screen adhesive. Lift the edges of the screen up slightly to check if there is any remaining adhesive.
Use an opening pick to remove any remaining adhesive keeping the screen stuck to the frame.
Grab the top right and bottom left corners of the screen.
Slowly slide the screen towards the bottom right corner to separate it from the frame.
Don't fully remove the screen as it is held in place by several ribbon cables underneath.
Shift the screen towards the bottom right corner of the frame until the ambient light sensor ribbon cable near the top edge is uncovered.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.