Opening Procedure

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 73 guias que incluem este passo.

Inglês

Chinês

Traduzindo o passo 5

Passo 5

Wait one minute to give the adhesive a chance to release and present an opening gap.
If your screen isn't getting hot enough, you can use a hair dryer to heat along the left edge of the iPad.
For complete instructions on how to use a hair dryer, check out this guide.
Insert an opening pick under the digitizer when the Anti-Clamp creates a large enough gap.
If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle clockwise half a turn.
Don't crank more than a half a turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.
Skip the next step.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.