Conserte seus objetos Comunidade Loja

iPad Pro 11" (3. Generation) Logic Board tauschen

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Voltar para o guia
Inglês
Alemão
Passo 23
iPad Pro 11" 3rd Gen Logic Board Replacement, Pry up the bottom: passo 0, imagem 1 %32 iPad Pro 11" 3rd Gen Logic Board Replacement, Pry up the bottom: passo 0, imagem 2 %32 iPad Pro 11" 3rd Gen Logic Board Replacement, Pry up the bottom: passo 0, imagem 3 %32
Pry up the bottom

  • Insert the flat end of a spudger under the lower edge of the logic board.

  • Don't pry against the bottom interconnect board as this will damage it.

  • Slowly lift up the bottom of the logic board.

  • If the adhesive is still too strong to lift up the logic board, apply some additional isopropyl alcohol and wait one minute.

  • Lift up the logic board and replace the playing card battery blocker with an opening pick.

Unterkante hochhebeln

Setze einen Spudger mit dem flachen Ende unter die Unterkante des Logic Boards.

Heble nicht gegen die untere Verbindungsplatine, sie könnte beschädigt werden.

Hebe die Unterkante des Logic Boards langsam hoch.

Wenn sich das Logic Board nicht leicht hochheben lässt, dann wende nochmals Alkohol an und warte eine Minute.

Ersetze die Spielkartenstreifen durch ein Plektrum, damit der Akku weiterhin abgetrennt bleibt.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.