Conserte seus objetos Comunidade Loja

Black Hole® Wheeled Duffel 손잡이 교체

Voltar para o guia
Inglês
Coreano
Passo 7
Handle Replacement on a Patagonia Black Hole® Wheeled Duffel, Reinstall the top handle bracket: passo 0, imagem 1 %32 Handle Replacement on a Patagonia Black Hole® Wheeled Duffel, Reinstall the top handle bracket: passo 0, imagem 2 %32 Handle Replacement on a Patagonia Black Hole® Wheeled Duffel, Reinstall the top handle bracket: passo 0, imagem 3 %32
Reinstall the top handle bracket

  • Place the top handle bracket back into place on top of the handle housing and ensure that the screw holes of the handle bracket align with the screw posts of the handle housing.

  • Use a Phillips PH2 screwdriver to install the five screws securing the top handle bracket while holding the bracket in place.

  • Follow the sequential order noted in the third photo.

  • Gently hand‑tighten the screws to avoid stripping the screw wells.

  • Lift the handle bracket at each screw location to ensure it's securely in place.

안쪽 상단 손잡이 브래킷 다시 설치하기

안쪽 상단 손잡이 브래킷을 핸들 하우징 위에 놓으세요. 이미지 #1 참조

나사를 올바르게 설치하기 위해서 안쪽 상단 손잡이 브래킷이 손잡이 하우징 나사 포스트와 정렬하는지 확인하세요. 이미지 #2 참조

브래킷을 제자리에 고정하며 쉽게 설치할 수 있도록 #2번 십자 드라이버를 사용하여 나사를 참조 이미지 #3에 표시된 순서대로 조여주세요. 나사는 너무 세게 조이지 마세요.

나사 다섯 개를 모두 조이고 나서 각 나사 위치에서 브래킷을 들어올려 상단 손잡이 브래킷이 제자리에 단단히 고정되었는지 확인하세요. 제자리에 제대로 고정되지 않은 나사는 올바로 고정될 때까지 다시 설치하세요.

-[title] Reinstall Inside Top Handle Bracket
-[* black] Place Inside Top Handle Bracket on top of Handle Housing. See Reference image #1
-[* black] Ensure Inside Top Handle Bracket aligns with screw post of Handle Housing for proper installation of screws. See Reference image #2
-[* black] Using a #2 Philips Screwdriver, install screws in sequential order as pictured in Reference Image#3 for ease of installation while holding bracket in place. Do not over tighten.
-[* icon_note] After installing all 5 screws, check installation of Top Handle Bracket to ensure it's securely in place by lifting bracket up at each screw location. Any screw not properly in place should be reinstalled until firmly secure.
+[title] Reinstall the top handle bracket
+[* black] Place the top handle bracket back into place on top of the handle housing and ensure that the screw holes of the handle bracket align with the screw posts of the handle housing.
+[* yellow] Use a Phillips PH2 screwdriver to install the five screws securing the top handle bracket while holding the bracket in place.
+ [* icon_note] Follow the sequential order noted in the third photo.
+ [* icon_caution] Gently hand‑tighten the screws to avoid stripping the screw wells.
+[* black] Lift the handle bracket at each screw location to ensure it's securely in place.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.