How to Replace a Ceiling Fan Lighting Circuit Power-Limiting Device

Inglês

Holandês

Traduzindo o passo 8

Passo 8

Reinstall the light pull-switch into the circuit.
Terminate the hot and neutral wires with the appropriate wire bundle using twist-on wire connectors.
After the completion of this step, there should be 4 white wires connected bound with one twist-on wire connector, and 2 black wires bound using a second twist-on wire connector.
Wire color-coding in accordance with the NFPA 70 - National Electrical Code is applicable. White wires are designated as neutral wires, black wires are designated as hot wires.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.