Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 2 guias que incluem este passo.
Traduzindo o passo 2
Passo 2
-
For the following steps, use tweezers:
-
Remove the connector equipped with the black and white wire.
-
Remove the connector equipped with the black, green, red, yellow, and white wires.
-
Using your fingers, remove the large connector located at the top right corner of the motherboard, as shown.
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.