Conserte seus objetos Comunidade Loja

iPhone 12 Pro Max 배터리 교체

Inglês
Coreano

Pré-requisitos de guia

Todos os guias tipo pré-requisito devem ser traduzidos antes de essa tradução ser considerada concluída.

iPhone 12 Pro Max Pentalobe/펜타로브/별나사 교체

여는 픽을 3mm에 표시하기

iPhone 12 Pro Max 디스플레이 어셈블리 교체

iPhone 12 Pro Max 라우드스피커 교체

iPhone 12 Pro Max Taptic Engine/탭틱 엔진 교체

Guia de informações

= Concluído = Incompleto
    iPhone batteries are rated to hold 80% of their capacity for up to 500 charge cycles, which lasts roughly 18-24 months for most users. After that, your iPhone may need to be charged far more frequently, and iOS may warn you that performance is affected (in other words, your phone will run slower). Use this guide to replace your battery and restore your iPhone to like-new performance.
    If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].
    '''***Note'''***: After the repairOn iOS 17.6 and earlier, your iPhone may display a warning about the “genuineness” of the battery after the repair, even when using original Apple parts. If your iPhone functions normally, you can safely ignore the warning. On iOS 18 and newer, authenticate your new battery using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
    For optimal performance, after completing this guide, [[Battery Calibration|calibrate]] your newly installed battery: Charge it to 100% and keep charging it for at least two more hours. Then use your iPhone until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''To reassemble your device, follow the above steps in reverse order.'''
      ***To reassemble your device, follow the above steps in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2012%20Pro%20Max|iPhone 12 Pro Max Answers community] for help.

      Passos do guia

      Passo 1 — 접착 스트립 찾기

      배터리는 신축성 접착제 네 개로 후면 케이스에 고정되어 있습니다—배터리 하단 가장자리에 두 개, 상단 가장자리에 두 개.

      Passo 2 — 신축성 접착제 제거하기

      첫 번째 배터리 접착 당김-탭을 배터리 하단 가장자리에서 벗기세요.

      Passo 3

      두 번째 배터리 접착 당김-탭을 배터리 하단 가장자리에서 벗기세요.

      Passo 4

      첫 번째 당김-탭을 손가락으로 잡고 배터리에서 멀리, iPhone 하단을 향해 천천히 당기세요.

      Passo 5

      두 번째 당김-탭을 손가락으로 잡고 배터리에서 멀리, iPhone 하단을 향해 천천히 당기세요.

      Passo 6

      배터리 상단 가장자리에서 나머지 배터리 접착 당김-탭 두 개를 벗기세요.

      Passo 7

      Using the same procedure as before, pull the remaining two tabs, one at a time, to stretch and remove the remaining adhesive strip holding the battery in place. Try not to snag the adhesive on anything.

      Passo 8 — 꼼짝않는 배터리 분리하기

      여전히 배터리를 분리하는데 문제가 있다면, 배터리 가장자리 아랫면 접착 스트립(들)이 끊어진 자리에 고농도 (90% 이상) 이소프로필 알코올 몇 방울을 바르세요.

      Passo 9 — 배터리 분리하기

      배터리를 분리하세요.

      Suas contribuições são licenciadas pela licença de código aberto Creative Commons.