Conserte seus objetos Comunidade Loja

iPhone 12 Pro Max ディスプレイアセンブリの交換

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 8 guias que incluem este passo.

Voltar para o guia
Inglês
Japonês
Passo 15
iPhone 12 Pro Max Display Assembly Replacement, Open the iPhone: passo 0, imagem 1 %32 iPhone 12 Pro Max Display Assembly Replacement, Open the iPhone: passo 0, imagem 2 %32 iPhone 12 Pro Max Display Assembly Replacement, Open the iPhone: passo 0, imagem 3 %32
Open the iPhone

  • Rotate your iPhone so the right edge faces you.

  • Open the iPhone by swinging the display up from the right side, like the front cover of a book.

  • Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

  • Lean the display against something to keep it propped up while you're working on the phone.

  • During reassembly, lay the display in position, align the clips along the top edge, and carefully press the top edge into place before snapping the rest of the display down. If it doesn't click easily into place, check the condition of the clips around the perimeter of the display and make sure they aren't bent.

iPhone本体を開きます

iPhoneを回転させて、右側端が手前に来るように配置します。

iPhoneのディスプレイを左側から右側に向けて(本のページをめくるように)開きます。

まだディスプレイを完全に開かないでください。iPhoneのロジックボードに接続されたデリケートなリボンケーブル数本が装着されたままです。

ディスプレイの背中に何かボックスを衝立てて、作業をしやすくします。

再組み立ての際にはディスプレイを定位置に置き、上端でクリップを揃えてゆっくりと所定の位置に押し込み、ディスプレイを取り付けます。 クリップが固定されたカチッという音がしない場合は、ディスプレイ周辺のクリップの状態を確認し、曲がっていないか確認してください。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.