Ir para o conteúdo principal

Nintendo Switch LCD屏幕拆解

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 2 guias que incluem este passo.

Inglês
Chinês
Passo 2
Nintendo Switch LCD and Digitizer Separation: passo 0, imagem 1 %32 Nintendo Switch LCD and Digitizer Separation: passo 0, imagem 2 %32 Nintendo Switch LCD and Digitizer Separation: passo 0, imagem 3 %32
  • Turn the screen assembly over.

  • Insert an opening pick in between the LCD panel and the digitizer at the top-left corner.

  • It doesn't matter how deep you insert the opening pick, but about 5 mm is enough to slice through all the adhesive.

  • You can slightly bend the digitizer to create a wider gap, but take care not to bend it too far to cause damage to the digitizer if you're reusing it.

  • Slide the opening pick along the top edge of the screen assembly to slice the adhesive.

将屏幕组件翻转过来。

在左上角的 LCD 面板和液晶前框之间插入一个三角撬片。

插入的深度无所谓,大约 5 毫米就足够分离粘合剂。

您可以稍微弯曲液晶屏幕以产生更多空间方便插入撬片,但请注意不要将其弯曲得太过,以免重新组装使用的时损坏液晶前框。

沿着屏幕组件的边缘滑动三角撬片以分离粘合剂。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.