Ir para o conteúdo principal

MacBook Pro (16 Zoll, 2019) Logic Board Einheit tauschen

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Alemão
Passo 42
MacBook Pro 16" 2019 Logic Board Assembly Replacement: passo 0, imagem 1 %32 MacBook Pro 16" 2019 Logic Board Assembly Replacement: passo 0, imagem 2 %32
  • The logic board assembly is a tight fit, but you can make it easier to remove by inserting a spudger under the left edge and levering it up slightly.

  • There should be no resistance as you remove the logic board. Check all cables carefully and hold them out of the way if needed so they don't snag on the board.

Die Logic Board-Einheit sitzt sehr eng, aber du kannst dir den Ausbau etwas erleichtern, indem du einen Spudger unter die linke Kante schiebst und sie ganz leicht nach oben hebst.

Das Logic Board sollte sich ohne großen Widerstand entfernen lassen. Überprüfe alle Kabel sorgfältig und schiebe sie, falls nötig, aus dem Weg, so dass sie nicht am Board hängen bleiben.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.