Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.
Traduzindo o passo 41
Passo 41
Remove the logic board
-
Peel up (but don't remove) the rubber vibration damping strip from the adhesive holding it to the fan.
-
If needed, apply mild heat with an iOpener, hair dryer, or heat gun to soften the adhesive and make the dampers easier to separate.
-
Repeat for the other adhesive strip on the opposite fan.
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.