Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.
Traduzindo o passo 37
Passo 37
-
Open the locking flap on the microphone array's ZIF connector by prying it straight up from the logic board.
-
Disconnect the microphone array by pulling its cable away from the logic board until it releases from its socket.
-
If possible, pull on the tape attached to the cable, rather than the cable itself, to reduce the risk of damage.
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.