Ir para o conteúdo principal

MacBook Pro (16 Zoll, 2019) Logic Board Einheit tauschen

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Alemão
Passo 33
MacBook Pro 16" 2019 Logic Board Assembly Replacement: passo 0, imagem 1 %32 MacBook Pro 16" 2019 Logic Board Assembly Replacement: passo 0, imagem 2 %32 MacBook Pro 16" 2019 Logic Board Assembly Replacement: passo 0, imagem 3 %32
  • Open the locking flap on the left fan's ZIF connector by prying it straight up from the logic board.

  • Disconnect the left fan by pulling its cable away from the logic board until it releases from its socket.

  • If possible, pull on the tape attached to the cable, rather than the cable itself, to reduce the risk of damage.

Heble den Sicherungsbügel am ZIF-Verbinder des linken Lüftersteckers zum Öffnen gerade vom Logic Board nach oben.

Ziehe das Kabel zum linken Lüfter vom Logic Board weg, bis es sich aus dem Anschluss löst.

Ziehe, wenn möglich, an dem am Kabel befestigten schwarzen Klebeband und nicht am Kabel selbst, damit das Kabel nicht beschädigt wird.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.