Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.
Traduzindo o passo 29
Passo 29
-
Disconnect the keyboard backlight by pulling its cable away from the logic board until it releases from its socket.
-
If possible, pull on the tape attached to the cable, rather than the cable itself, to reduce the risk of damage.
-
Move the cable away from its connector so it can more easily clear the logic board during removal.
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.