Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Francês
Passo 8
Disconnect the power button and Touch ID sensor by prying its connector straight up from the logic board. These two small connectors have a  tendency to get caught underneath the logic board during reinstallation, so double check they're correctly positioned before screwing down the logic board.
  • Disconnect the power button and Touch ID sensor by prying its connector straight up from the logic board.

  • These two small connectors have a tendency to get caught underneath the logic board during reinstallation, so double check they're correctly positioned before screwing down the logic board.

Débranchez le bouton de marche et capteur Touch ID en soulevant son connecteur à la verticale de la carte mère.

Ces deux petits connecteurs ont tendance à rester accrochés sous la carte mère lors du remontage. Vérifiez donc bien qu'ils sont positionnés correctement avant de les revisser à la carte mère.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.