Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Alemão
Passo 8
Disconnect the power button and Touch ID sensor by prying its connector straight up from the logic board. These two small connectors have a  tendency to get caught underneath the logic board during reinstallation, so double check they're correctly positioned before screwing down the logic board.
  • Disconnect the power button and Touch ID sensor by prying its connector straight up from the logic board.

  • These two small connectors have a tendency to get caught underneath the logic board during reinstallation, so double check they're correctly positioned before screwing down the logic board.

Trenne den Sensor der Einschalttaste und der Touch ID ab, indem du seinen Stecker gerade vom Logic Board hochhebelst.

Diese beiden kleinen Stecker verfangen sich beim Zusammenbau leicht unter dem Logic Board. Überprüfe also ihren Sitz ganz genau, bevor du das Logic Board wieder festschraubst.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.