Conserte seus objetos Comunidade Loja

重新密封

Voltar para o guia
Inglês
Chinês
Passo anterior

Traduzindo o passo 2

Passo 2
Resealing Procedure: passo 0, imagem 1 %32 Resealing Procedure: passo 0, imagem 2 %32 Resealing Procedure: passo 0, imagem 3 %32

  • Align the screen and press it down firmly onto the adhesive.

  • For best results, apply heat from your iOpener, heat gun, or hair dryer to help set the adhesive.

  • After the screen sits in place apply some pressure for a few hours by wrapping the watch with a couple rubber bands, or placing it under a heavy book or two.

对准屏幕，然后将其向下牢固地按到粘合剂上。

为了获得最佳效果，请使用iOpener，热风枪或吹风机加热以帮助固化粘合剂。

屏幕放好后，用几根橡皮筋包住手表，或将其放在一两本沉重的书本下，施加一些压力几个小时。

作为最后检查，请打开手表电源并确保Force Touch正常工作——在屏幕上用力按压会导致手表振动，并且按压动作应在显示屏上显示。

[* black] Align the screen and press it down firmly onto the adhesive.
[* black] For best results, apply heat from your iOpener, heat gun, or hair dryer to help set the adhesive.
[* black] After the screen sits in place apply some pressure for a few hours by wrapping the watch with a couple rubber bands, or placing it under a heavy book or two.
-[* black] As a final check, power on your watch and make sure Force Touch works correctly—a hard press on the screen should cause the watch to vibrate, and the press should register on the display.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.