Conserte seus objetos Comunidade Loja

開口方法

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 5 guias que incluem este passo.

Voltar para o guia
Inglês
Japonês
Passo 2
Opening Procedure, Safety Requirements: passo 0, imagem 1 %32 Opening Procedure, Safety Requirements: passo 0, imagem 2 %32 Opening Procedure, Safety Requirements: passo 0, imagem 3 %32
Safety Requirements

  • Because the gap between the screen and watch body is so thin, a sharp blade is needed to separate the two. Read the following warnings carefully before proceeding.

  • Protect your fingers by keeping them completely clear of the knife. If in doubt, protect your free hand with a heavy glove, such as a leather shop glove or gardening glove.

  • Be careful not to apply too much pressure, as this might cause the knife to slip and cut you, or damage the watch.

  • Wear eye protection. The knife or glass may break, sending pieces flying.

  • Feel free to attach or remove the watch band as needed to provide more control as you make repairs.

安全要件

スクリーンとWatch本体の間の隙間は非常に狭いため、鋭利なブレードを使ってこの二つを乖離させなければなりません。作業を始める前に、次の注意書きをよく読んでください。

作業中、ナイフから完全に指を離して指先を保護してください。不安な方は、ナイフを持っていない側の手をレザーグローブやガーデニング用グローブを着用してください。

強いプレッシャーを本体に与えないようにご注意ください。ナイフがスリップしてしまい、怪我をしたりWatchにダメージを与えてしまうことになります。

保護メガネを着用してください。ナイフもしくはガラスが割れてしまうと、破片が飛び散ることがあります。

Watch用ハンドの有無によってコントロール加減が変わる場合は、作業がやりやすい様に着用する、もしくは外してください。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.