-
Use a spudger, or a clean fingernail to flip up the locking flap—this is the unlocked position.
-
Once the flap is in the unlocked position, use tweezers or your fingers to gently pull the cable out of its socket.
-
To reconnect, make sure the locking flap is flipped up and gently reinsert the cable. Then, flip the locking flap down to secure the cable. The cable should slide into the socket with little to no force. If you're having trouble, remove it, check that the flap is fully unlocked, and try again.
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.
Atalhos de Teclado para Edição de Passos de Guia:
Ctrl + Shift + N
Inserir uma nova linha abaixo
Ctrl + Shift + P
Inserir uma nova linha acima
Ctrl + ]
Recuar linha atual
Ctrl + [
Remover o recuo da linha atual
Ctrl + D
Excluir a linha atual
Shift + ;
Ir para o próximo passo.
Shift + H
Ir para o passo anterior.
Exibir todos os atalhos