Conserte seus objetos Comunidade Loja

How to Repair Double Vision on Barska 10x50 Wide-Angle Binoculars

Voltar para o guia
Inglês
Coreano
Passo 8
How to Repair Double Vision on Barska 10x50 Wide-Angle Binoculars: passo 0, imagem 1 %32 How to Repair Double Vision on Barska 10x50 Wide-Angle Binoculars: passo 0, imagem 2 %32

  • Adjust the two 1.5 mm flat head prism screws by slightly turning the driver.

  • Note: Look through the binoculars after each turn, and if the vision is aligned, you can stop at this step. If adjusting these screws does not align the vision, proceed to Step 9.

  • DO NOT tighten the prism screws too much, or you will crack the prism and permanently destroy it. Repairing or replacing the prism is beyond the scope of this guide.

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.