Conserte seus objetos Comunidade Loja

Apple Watch Series 2 的屏幕开启指南

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 7 guias que incluem este passo.

Voltar para o guia
Inglês
Chinês
Passo 4
Apple Watch Series 2 Display Opening, Pry up the screen: passo 0, imagem 1 %32 Apple Watch Series 2 Display Opening, Pry up the screen: passo 0, imagem 2 %32 Apple Watch Series 2 Display Opening, Pry up the screen: passo 0, imagem 3 %32
Pry up the screen

  • Place the edge of a curved blade into the thin gap between the display and the outer case. Start at the short side of the display, closest to the digital crown.

  • Press firmly straight down into the gap.

  • Once inserted, tilt the blade to pry the display open slightly.

  • Do not insert the knife more than 1/16th of an inch (~2 mm).

Insira tradução aqui

始终保持手指完全远离刀。 千万不要施加太大的压力，因为这可能会导致刀滑动并切割或损坏手表。

仅将刀片的细边插入间隙，然后朝您的方向倾斜刀片以加宽间隙，并将显示屏略微抬起。

将弯曲刀片的边缘放入显示器和外壳之间的薄间隙中。 从显示屏的短边开始，最靠近圆形圈。

不要将刀插入1/16英寸（约2毫米）。

-[* icon_caution] Always keep your fingers completely clear of the knife. Be careful not to apply too much pressure, as this might cause the knife to slip and cut you, or damage the watch.
+[title] Pry up the screen
[* black] Place the edge of a curved blade into the thin gap between the display and the outer case. Start at the short side of the display, closest to the digital crown.
-[* black] Insert only the thin edge of the blade into the gap, and then tilt the blade towards you to widen the gap and lift the display slightly open.
+[* black] Press firmly ''straight down'' into the gap.
+[* black] Once inserted, tilt the blade to pry the display open slightly.
[* icon_caution] Do not insert the knife more than 1/16th of an inch (~2 mm).

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.