Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 9 guias que incluem este passo.
Traduzindo o passo 6
Passo 6
-
Insert a razor knife between the metal back cover and the front glass to create a gap. Insert an opening pick into the gap and slide it to the top right corner.
-
Insert a second opening pick and slide it to the top left corner.
-
Slide the opening picks along the edges to seperate the plastic clips, holding back cover and midframe together.
-
Remove the rear cover.
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.